Orchidea Light solves the problem when light switches or sockets are required close to the door opening and where previously the wiring to the switchbox/socket would prevent the door from opening.

The design of the cassette enables wiring to be housed in special channels in the frame. 4 openings in the frame allow for sockets/switches to be installed.

Sockets/switches can be arranged in 4 positions and at different heights: 28-103 - 153-198 cm.

Architectural drawing of the frame seen from above.

On request, the housing for the cabling can be prearranged on the right or on the left of the frame. It is also possible, where required, to house the cabling on both sides of the frame (in this case the finished wall thickness is 150 mm).

Dovetail sheet Corrugation
ORCHIDEA LIGHT frame is made of galvanized steel panels enhanced with «top quality easy-film passivation», roll-formed with dovetail corrugation to provide maximum rigidity and to ensure a perfect structure for plastering.

Single mesh fixed with retaining clips
The method by which the wire mesh is attached to the frame facilitates the insertion of the cassette in to the wall. Additionally, welding or puncturing of the frame, which can lead to corrosion which in turn may damage the plasterwork isn’t required.

Single mesh bigger than the cassette
The electric-welded single mesh, supplied in a bigger size than the cassette, ensures an excellent bond between plaster, mesh and sheet avoiding cracks on the finished wall.

Sliding door gear track
The newly designed header incorporates the sliding door gear track which is extruded anodised aluminium and is capable of carrying a door up to 120kg in weight.

Hangers
Larger hangers for a quieter, smoother action coupled with a load capacity of 120kg.

Assembly of the sliding door gear track
Re designed system for track locking

Floor guide
New push fitting floor guide for quick installation.

Fixing of track/upright jamb
New snap-fit component to aid the fixing of the track and the vertical jamb.